NEW TBK 968C 10 inch plate heating separate machine built-in mini debubbler with wire separating lcd touch screen damaged repair Item NO.: 6578304352291

1.Desigh of safety lock and integrated debubble area bubble remove separating

2.curved screen, straight screen and flat PAD are all supported

3.Solid without weiding spots

1. Turn on the power: Insert the power cord into the power port on the back of the separator and turn on the power switch.
2. Preset temperature: Press the SET button to preset thetemperature, press the up button to set the temperature toabout 85 degrees, and press NET to save.
3. Prepare wire handle: Equipped with wire handle to separatethe screen.
4. Place the silicone anti-skid pad: Place it on the panel of theseparator Align the pad with the panel holes.
5. Preparation for screen separation: Put the screen to beseparated into the center of the panel, press the start buttonto start vacuum adsorption, and make sure that the screen issucked.
6. Start cutting screen: the screen can be preheated for 3-5minutes to start cutting.
7. After separating the burst screen, turn off the power of theseparator. If it is dry glue, you can tear it off directly by hand