Ships from Shenzhen · DHL / FedEx / UPS worldwide

LIGHTSPEED

Samsung S21 Repair Guide: S21, S21+ and S21 Ultra Parts and Faults

17 November 2026 · LightspeedTools team

Short answer: Samsung S21 repair covers three phones: the S21 and S21+ have flat OLED screens, while the S21 Ultra has a curved, higher-resolution panel and S Pen support. The base S21 is generally reported to use a plastic back, unlike the glass on the S21+ and Ultra. The common jobs are screens with frame, batteries, charging sub-boards, back panels, camera lenses and earpieces, and sub-boards and flex cables differ by region code, so match SM-G991B, G991U and so on before you order.

The Galaxy S21 family launched in early 2021 and is now a mature repair platform. Prices for parts have settled, the phones are out of warranty, and many owners would rather fix than replace. This guide brings the three models together: how they differ, the repairs you see most, commonly reported problems and the parts for each job.

The three Galaxy S21 models and how they differ

ModelScreenEdgesBackExample model codes
Galaxy S216.2" Dynamic AMOLED, up to 120 HzFlatPlastic (as generally reported)SM-G991B, SM-G991U, SM-G991N
Galaxy S21+6.7" Dynamic AMOLED, up to 120 HzFlatGlassSM-G996B, SM-G996U, SM-G996N
Galaxy S21 Ultra6.8" Dynamic AMOLED, higher resolution, up to 120 HzCurved at the sides (as generally described)GlassSM-G998B, SM-G998U, SM-G998N

What this means at the bench:

  • Flat screens on the S21 and S21+ are easier to handle than the curved panels on earlier S models. The Ultra's curved edges need more care during removal and fitting.
  • The base S21's back is usually described as plastic rather than glass. It does not shatter like glass, but it scratches, cracks at corners and softens with too much heat.
  • The S21 Ultra supports the S Pen (sold separately, with no built-in slot, as generally reported). The digitizer layer that reads the pen is part of the screen assembly, so after any Ultra screen job, test S Pen input as well as finger touch.
  • All three use an ultrasonic in-display fingerprint sensor, which needs a proper OLED screen to read through.
  • Regions matter. B models generally use Exynos chips, U models (US) use Snapdragon, and N is the Korean version. Screens are often shared across regions, but charging sub-boards and main board flex cables are commonly listed by region code because their layouts differ.

Check the model in Settings, About phone, or on the box label before you order any board-level part.

The most common S21 series repairs

Screen replacement: with frame or without

Screens are the top S21 job. Most shops fit a screen assembly with frame: the OLED comes pre-bonded in a new middle frame, and you transfer the main board, battery, sub-board, cameras, speakers and flex cables across. This avoids prying a thin OLED off the old frame and gives the customer fresh, straight frame edges.

A screen-only (without frame) repair is possible on the flat S21 and S21+, but you have to separate the panel cleanly, remove every trace of old adhesive and fit fresh adhesive evenly. On the curved Ultra, panel-only work is riskier, so the framed assembly is the safer route.

Framed assemblies include the Galaxy S21 OLED screen assembly with frame, the Galaxy S21 Plus OLED screen assembly with frame and the Galaxy S21 Ultra OLED screen assembly with frame. Pick the frame colour that matches the phone's sides and back, because the frame edge is visible on the finished phone.

Battery replacement

The battery sits under the back panel and is glued to the frame. Remove the back with gentle, even heat, lift off the wireless charging and NFC coil assembly, disconnect the battery, then release the adhesive with isopropyl alcohol and plastic cards. Do not bend or puncture the cell. On the plastic-backed S21, keep the heat lower so the back panel does not warp. Our step-by-step guide to Samsung battery replacement, adhesive and heat safety covers this in more detail.

Charging port and sub-board

On all three models the USB-C port is on a sub-board at the bottom of the phone. Clean the port and test with a known-good cable and charger before you replace anything. If the board is faulty, order the version for the exact model code: the Galaxy S21 SM-G991B/N USB charging board suits the international and Korean S21, while the Galaxy S21 Plus SM-G996U USB charging board is for the US S21+. Fitting a B board to a U phone (or the other way round) is a common mistake. See our guide to Samsung charging port and sub-board swaps for full diagnosis steps.

If a new sub-board does not fix charging, the bottom microphone or signal, check the main board flex that links the two boards. The Galaxy S21 Ultra SM-G998B main board flex cable is one example; this part is also listed by model and region code.

Back panel and back glass

Back replacement on the S21 series often comes with the camera surround. On the S21+ and Ultra the glass back and camera bump area are commonly supplied together, such as the Galaxy S21 Ultra battery door with camera holder. For the base S21, a replacement back such as the Galaxy S21 battery door fits after the old one is removed and the frame is cleaned. Always fit fresh pre-cut adhesive and clamp the back while it sets.

Cameras and camera lenses

The rear camera housing stands proud of the body and takes knocks, so cracked lenses are common. If the camera behind still focuses and shows a clean picture, a new lens or camera holder with lens is a quick job. Test every rear camera, including zoom on the Ultra, before and after the repair so you can show the customer the cameras were working.

Earpiece

Low call volume is often dust or grease in the earpiece mesh at the top of the screen. Clean it first. If the speaker is faulty, fit the matching part, such as the Galaxy S21 SM-G991B earpiece speaker, and test calls on speaker and handset mode.

Commonly reported problem areas

These are issues technicians and owners often mention for this series. They are not guaranteed faults, and every phone needs its own diagnosis.

  • Green or coloured lines. Vertical lines are reported on a number of Samsung OLED phones of this era, including some S21 Ultra units. If the line is in the panel, the usual fix is a new screen assembly.
  • Fingerprint problems after a screen swap. Often caused by low-grade screens or by not re-registering fingerprints. Use a good OLED screen and re-enrol fingerprints after fitting.
  • Cracked camera lenses and back corners. The camera surround and the corners of the plastic back on the base S21 are frequent damage points.
  • Battery wear. Many S21 phones are now several years old. Fast drain, sudden shutdowns or a lifting back can all point to a worn or swelling battery.
  • Charging faults by region. Wrong-region sub-boards cause "charging not working" complaints after repair. Check the code twice.

Parts by job

JobPartNotes
S21 screenS21 OLED screen assembly with frameFlat panel; match the frame colour
S21+ screenS21 Plus OLED screen assembly with frameTransfer all internals into the new frame
S21 Ultra screenS21 Ultra OLED screen assembly with frameCurved; test S Pen and touch afterwards
S21 not chargingS21 SM-G991B/N USB charging boardB and N versions; US phones use G991U boards
S21+ (US) not chargingS21 Plus SM-G996U USB charging boardUS model only
Faults after a new sub-boardS21 Ultra SM-G998B main board flex cableListed by model and region code
Ultra back damageS21 Ultra battery door with camera holderBack and camera surround together
S21 back damageS21 battery doorPlastic back; keep heat low
Quiet callsS21 SM-G991B earpiece speakerClean the mesh before replacing

Service pack or aftermarket screen?

Samsung's service pack screens are genuine assemblies, generally supplied with a frame, giving original colour, brightness, 120 Hz behaviour, fingerprint support and S Pen support on the Ultra. Aftermarket screens cost less and vary a lot in quality: a good OLED copy can be close to original, while low-grade panels may have weaker colour, higher power use or fingerprint problems. For an S21 Ultra the customer will keep for years, original quality is usually worth it. For an older S21 that needs a budget fix, a good aftermarket OLED can be the right call. Our full comparison is in Samsung screen replacement: service pack vs aftermarket.

Safety and good practice

  • Use an ESD strap and grounded mat. Disconnect the battery first and reconnect it last.
  • Keep heat moving and moderate, especially on the plastic S21 back and near the battery.
  • Never puncture, crush or bend a lithium battery. Store swollen or damaged cells in a fireproof container and recycle them properly.
  • Fit new adhesive for every screen and back job, and tell the customer that factory water resistance cannot be guaranteed after any repair.
  • Test touch, display, fingerprint, S Pen (Ultra), all cameras, speakers, microphones, wired and wireless charging, and signal before you hand the phone back.

Check software support before big repairs

Samsung supports each model with Android version and security updates for a set period, and the S21 series is now at or near the end of that period. Check Samsung's current security update list for the exact model before quoting an expensive job such as a service pack screen, so the customer can weigh the repair cost against how long the phone will keep getting patches.

Questions

Is the S21 screen the same as the S21+ or S21 Ultra screen?

No. Each model has its own screen size and frame, and the Ultra's panel is curved with S Pen support. Order the screen for the exact model, and match the frame colour if you use a framed assembly.

Does the S21 have a glass or plastic back?

The base S21 is generally reported to use a plastic back, while the S21+ and S21 Ultra use glass. Plastic backs need lower heat during removal so they do not warp. Order the back panel made for the exact model.

What is the difference between SM-G991B and SM-G991U parts?

SM-G991B is the international S21 and SM-G991U is the US version. Screens are often shared, but charging sub-boards and main board flex cables are commonly different, so match the code on the phone to the code on the part.

Will the S Pen work after an S21 Ultra screen replacement?

With a genuine service pack or a good-quality screen built for the Ultra, S Pen input should work. Some low-grade aftermarket screens may not support it fully. Test the pen before you close the phone and tell the customer which screen grade you are fitting.

Find screens, sub-boards, backs and small parts for the whole series in the Samsung parts range and our Samsung screens collection. Repair shops can open a wholesale account for trade pricing and reorder by SKU or CSV with Quick Order.

Products in this article

More guides for repair shops